An important capability of most smart, Internet-of-Things-enabled spaces (e.g., office, home, hospital, factory) is the ability to leverage context of use. This can support social awareness, allowing people to interact more effectively which each other. Location is a key context element; particularly indoor location. Recent advances in radio ranging technologies, such as 802.11-2016 FTM, promise the availability of low-cost, near-ubiquitous time-of-flight-based ranging estimates. In this paper, we build on prior work to enhance this ranging technology's ability to provide useful location estimates. For further improvements, we model user-motion behavior to estimate the user motion state by taking the temporal measurements available from time-of-flight ranging. We select the velocity parameter of a particle-filter-based on this motion state. We demonstrate meaningful improvements in coordinate-based estimation accuracy and substantial increases in room-level estimation accuracy. Furthermore, insights gained in our real-world deployment provides important implications for future Internet of Things context applications and their supporting technology deployments such as social interaction, workflow management, inventory control, or healthcare information tools.

A motivating, core capability of most smart, Internet of Things enabled spaces (e.g., home, office, hospital, factory) is the ability to leverage context of use. Location is a key context element; particularly indoor location. Recent advances in radio ranging technologies, such as 802.11-2016 FTM, promise the availability of low-cost, near-ubiquitous time-of-flight-based ranging estimates. In this paper, we build on prior work to enhance the technology's ability to provide useful location estimates. We demonstrate meaningful improvements in coordinate-based estimation accuracy and substantial increases in room-level estimation accuracy. Furthermore, insights gained in our real-world deployment provides important implications for future Internet of Things context applications and their supporting technology deployments such as workflow management, inventory control, or healthcare information tools.

Localization in an indoor and/or Global Positioning System (GPS)-denied environment is paramount to drive various applications that require locating humans and/or robots in an unknown environment. Various localization systems using different ubiquitous sensors such as camera, radio frequency, inertial measurement unit have been developed. Most of these systems cannot accommodate for scenarios which have substan- tial changes in the environment such as a large number of people (unpredictable) and sudden change in the environment floor plan (unstructured). In this paper, we propose a system, InFo that can leverage real-time visual information captured by surveillance cameras and augment that with images captured by the smart device user to deliver accurate discretized location information. Through our experiments, we demonstrate that our deep learning based InFo system provides an improvement of 10% as compared to a system that does not utilize this real-time information.

Activity recognition is a core component of many intelligent and context-aware systems. We present a solution for discreetly and unobtrusively recognizing common work activities above a work surface without using cameras.We demonstrate our approach, which utilizes an RF-radar sensor mounted under the work surface, in three domains; recognizing work activities at a convenience-store counter, recognizing common office deskwork activities, and estimating the position of customers in a showroom environment. Our examples illustrate potential benefits for both post-hoc business analytics and for real-time applications. Our solution was able to classify seven clerk activities with 94.9% accuracy using data collected in a lab environment and able to recognize six common deskwork activities collected in real offices with 95.3% accuracy. Using two sensors simultaneously, we demonstrate coarse position estimation around a large surface with 95.4% accuracy. We show that using multiple projections of RF signal leads to improved recognition accuracy. Finally, we show how smartwatches worn by users can be used to attribute an activity, recognized with the RF sensor, to a particular user in multi-user scenarios. We believe our solution can mitigate some of users’ privacy concerns associated with cameras and is useful for a wide range of intelligent systems.

Accurate localization is a fundamental requirement for a variety of applications, ranging from industrial robot operations to location-powered applications on mobile devices. A key technical challenge in achieving this goal is providing a clean and reliable estimation of location from a variety of low-cost, uncalibrated sesnors. Many current techniques rely on Particle Filter (PF) based algorithms. They have proven successful at effectively fusing various sensors inputs to create meaningful location predictions. In this paper we build upon this large corpous of work. Like prior work, our technique fuses Received Signal Strength Indicator (RSSI) measurements from Bluetooth Low Energy (BLE) beacons with map information. A key contribution of our work is a new sensor model for BLE beacons that does not require the mapping from RSSI to distance. We further contribute a novel method of utilizing map information during the initialization of the system and during the resampling phase when new particles are generated. Using our proposed sensor model and map prior information the performance of the overall localization is improved by 1.20 m on comparing the 75th percentile of the cumulative distribution with traditional localization techniques.

In this paper, we develop a system for the lowcost indoor localization and tracking problem using radio signal strength indicator, Inertial Measurement Unit (IMU), and magnetometer sensors. We develop a novel and simplified probabilistic IMU motion model as the proposal distribution of the sequential Monte-Carlo technique to track the robot trajectory. Our algorithm can globally localize and track a robot with a priori unknown location, given an informative prior map of the Bluetooth Low Energy (BLE) beacons. Also, we formulate the problem as an optimization problem that serves as the Backend of the algorithm mentioned above (Front-end). Thus, by simultaneously solving for the robot trajectory and the map of BLE beacons, we recover a continuous and smooth trajectory of the robot, corrected locations of the BLE beacons, and the time varying IMU bias. The evaluations achieved using hardware show that through the proposed closed-loop system the localization performance can be improved; furthermore, the system becomes robust to the error in the map of beacons by feeding back the optimized map to the Front-end.

Convolutional Neural Networks (CNN) have successfully been utilized for localization using a single monocular image [1]. Most of the work to date has either focused on reducing the dimensionality of data for better learning of parameters during training or on developing different variations of CNN models to improve pose estimation. Many of the best performing works solely consider the content in a single image, while the context from historical images is ignored. In this paper, we propose a combined CNN-LSTM which is capable of incorporating contextual information from historical images to better estimate the current pose. Experimental results achieved using a dataset collected in an indoor office space improved the overall system results to 0.8 m & 2.5° at the third quartile of the cumulative distribution as compared with 1.5 m & 3.0° achieved by PoseNet [1]. Furthermore, we demonstrate how the temporal information exploited by the CNN-LSTM model assists in localizing the robot in situations where image content does not have sufficient features.

In this paper, we propose a novel solution to optimize the deployment of (RF) beacons for the purpose of indoor localization. We propose a system that optimizes both the number of beacons and their placement in a given environment. We propose a novel cost-function, called CovBSM, that allows to simultaneously optimize the 3-coverage while maximizing the beacon spreading. Using this cost function, we propose a framework that maximize both the number of beacons and their placement in a given environment. The proposed solution accounts for the indoor infrastructure and its influence on the (RF) signal propagation by embedding a realistic simulator into the optimization process.

Activity recognition is a core component of many intelligent and context-aware systems. In this paper, we present a solution for discreetly and unobtrusively recognizing common work activities above a work surface without using cameras. We demonstrate our approach, which utilizes an RF-radar sensor mounted under the work surface, in two work domains; recognizing work activities at a convenience-store counter (useful for post-hoc analytics) and recognizing common office deskwork activities (useful for real-time applications). We classify seven clerk activities with 94.9% accuracy using data collected in a lab environment, and recognize six common deskwork activities collected in real offices with 95.3% accuracy. We show that using multiple projections of RF signal leads to improved recognition accuracy. Finally, we show how smartwatches worn by users can be used to attribute an activity, recognized with the RF sensor, to a particular user in multi-user scenarios. We believe our solution can mitigate some of users’ privacy concerns associated with cameras and is useful for a wide range of intelligent systems.

In this paper, we propose a real-time classification scheme to cope with noisy Radio Signal Strength Indicator (RSSI) measurements utilized in indoor positioning systems. RSSI values are often converted to distances for position estimation. However due to multipathing and shadowing effects, finding a unique sensor model using both parametric and nonparametric methods is highly challenging. We learn decision regions using the Gaussian Processes classification to accept measurements that are consistent with the operating sensor model. The proposed approach can perform online, does not rely on a particular sensor model or parameters, and is robust to sensor failures. The experimental results achieved using hardware show that available positioning algorithms can benefit from incorporating the classifier into their measurement model as a meta-sensor modeling technique.